Getting the right final drive for your machine is paramount to it working right.
First, you're going to need your machine information. The most important peice of information is the machine serial number. Make sure you have that before you start calling around for a final drive. Obviously, knowing the make and model helps too.
If
ConEquip Parts has many different models of Volvo Excavator Final Drives and Travel Motors in stock and ready to ship to your jobsite with FREE 3 day shipping. If you’re looking for a final drive for your Volvo excavator or wheel loader, ConEquip can supply you with the part you need that is built to industry standards and backed by the same warranty as the OEM d
When you need to replace your excavator’s final drive, an option is a rebuilt drive. What exactly do you get when you invest in a rebuilt final drive? Here is a look at what you should expect.
The process starts with a core that has been designated rebuildable. A core is rebuildable if
A problem excavator owners run into from time to time is a final drive that spins backwards. When this happens the initial thought is often that there's a problem with the final drive. Instead, the high pressure hydraulic lines are hooked up in reverse.
Final drives have two large hydraulic
When it comes to machine parts, you need to be sure you have all the information necessary to get the right parts. Too often machine owners get the wrong parts sent because the supplier received the wrong information. The most important information is the machine serial number. That doesn't always ensure accuracy. When it comes to your machine's final drive, the
We get a lot of calls here at ConEquip from people needing a final drive for the excavator or bulldozer. Customers often say one side of the unit is fine but the other needs to be replaced. The thought is they can save money by simply replacing just the motor or the reduction.
As with those Arby's commercials, ConEquip Parts has the meats when it comes to final drives for the Caterpillar 311, 312, 313, and 314 excavators. Details in a moment but first, a little overview on these models.
The 311, 312, 313, and 314 series models are still running strong despite the fact they are closing in on three decades since they first started
ConEquip Parts has a shipment of new OEM surplus compact track loader final drives coming in the month of April. Many Caterpillar dealers do not have these in stock and are back ordered if they are able to get them at all anymore. The part number is 442-5642 which will fit the 279C, 279D, 289C, 289D, 299D, 299D XHP, 299D2, and 299D2 XHP models.
If you
We get a lot of calls here at ConEquip Parts from mini excavator owners looking for parts to rebuild their final drive. It seems like a simple request. They just need a gear or two, seals, bearings, and perhaps a number of other parts. In their mind, they just need to open the unit, remove the bad parts, install the new ones, reseal the final drive, hook it
Parts Specialist Sam Ginavan received a call from his good customer Charles at CJ's Concrete needing a final drive for a Deere 35ZTS mini excavator.
"He actually called back in November needing this drive. Glad we could help him out," Ginavan said.
ConEquip Parts provides new replacement final drives for the Deere 35ZTS with the same specifications
