Our Parts Specialist Travis Flaherty was able to set up Demolition Man Inc., in Washington State with a resealed swing motor for a Kobelco SK300 Mark IV excavator. John over there in Seattle has been
excavator
-
Posted: July 10, 2018
-
Posted: July 06, 2018
Sales Specialist Garrett Hart got a call from Maxfield Construction needing a final drive for their Kobelco SK135SRLC-1. Maxfield Construction does amazing work in and around the Fort
-
Posted: July 02, 2018
One of our top Parts Specialists Bryan Branch has been working hard for Marvirose Contracting Ltd. up in Canada for the past few months. Marvirose does a great job digging foundations and other excavation work in and around Bradford, Ontario. Bryan has been working with Rocco on parts for their many machines which include Link-Belt
-
Posted: June 27, 2018
As you probably already know there is a lot to swapping out your swing bearing. The bearing, or slew ring as they're often called, is one of the most important and costly parts on excavators and cranes. Any part needs special attention to make sure it is installed correctly
-
Posted: June 27, 2018
When it's time to replace your swing bearing, or slew ring as they're often called, it usually means it's also time to make a trip to your ATM. They are one of the most expensive parts on an excavator
-
Posted: June 26, 2018
If you own a Caterpillar bulldozer, excavator, wheel loader, backhoe
-
Posted: December 20, 2017Categories: ConEquip 101 - Learning
When buying used construction parts from salvage yards the general thought is you get what you pay for. Although on many levels this is a true statement, that isn't necessarily the rule. In fact, there are federal and state laws in place to help protect customers who want to return damaged or unwanted merchandise.
-
Posted: December 15, 2017Categories: News
Working with construction hydraulics requires knowledge both about the proper use of the equipment and the maintenance. Here are six must-do tips to keep your hydraulic equipment running right.
CHANGE THE OIL
This
-
Posted: December 12, 2017Categories: Success Stories
A heavy equipment repair in Oregon contacted Molly Luzak here at ConEquip Parts needing a control valve for a CAT 325C.
"I had a good used option for him that will work great," Luzak said.
This is the second control valve in just a couple months the